PLASTIC CAPS MACHINES - SPECIAL MACHINES

Index motion special slitting – folding machine with 1 head for cutting the tamper evident ring and folding the inner flap of plastic closures having big diameters (from Ø40mm to Ø65mm).

Transfer star with intermittent movement.

Slitting station with 1 head with blade heated by resistances controlled by a thermo-regulator.

Air cooling system.

Folding station with 1 punch.

Options: serpentine accumulation channel with heating system; closure temperature closed loop control.

The machine complies with European safety laws (CE).

Output: 7.500 pcs/hr maximum.

Laboratory slitting machine with one head for cutting the tamper evident ring of plastic closures:

• Flywheel with 3 to 6 different axle centres to accept various cap diameters.
• Pneumatic cylinder for stopping the cap onto the head.
• Blade heated by a resistance controlled by a thermo-regulator.
• Air cooling system.

Folding equipment for folding the inner flap of plastic closures:

• Pneumatic movement
• Air treatment group
• 2-hands drive

The machine complies with European safety laws (CE).

Index motion inserting machine for inserting pre-cut and pre-stacked liners in tube inside plastic or aluminium caps.

• Transfer star with intermittent movement.
• Inserting station with 1 or 2 punches.
• Height check of the punch for checking the presence / absence of the liner or double liners.
• Tube for feeding pre-stacked liners.

Options:

• Hot-melt gluing station and infrared sensors for checking the temperature of the glue;
• Automatic loading system for 8/10 tubes with linear axis driven by brush less motors, photoelectric barrier for stopping the movement during the loading phase and management of the tubes’ loading sequence from operator’s panel.

The machine complies with European safety laws (CE).
Output: from 6.000 to 12.000 pcs/hr maximum depending on the number of punches and on the type of closure.