ASSEMBLY CAPS MACHINES

Continuous motion rotary assembling machine with 3 flywheels with 24 punches each for sport caps for assembling up to a maximum of 3 components.

Loading stars synchronised with the flywheels.

The machine complies with European safety laws (CE)

Output: 36.000 pcs/hr maximum depending on the type of product to be processed.

Continuous motion rotary assembling machine with three flywheels with 16 punches each for assembling up to a maximum of 4 plastic and aluminium components.

Loading stars synchronised with the flywheels.

The machine complies with European safety laws (CE)

Output: 20-30.000 pcs/hr depending on the type of product to be processed.

Continuous motion rotary assembling machine with four flywheels with 16 punches each for assembling up to a maximum of 5 plastic and aluminium components.

Loading stars synchronised with the flywheels.

The machine complies with European safety laws (CE)

Output: 20-30.000 pcs/hr depending on the type of product to be processed.

Rolling / assembling line for special closures in aluminium + plastic consisting of:

• 1 continuous motion special rotary rolling machine with 4 heads for perforating and bending the aluminium;
• 1 continuous motion rotary assembling machine with 2 flywheels with 16 punches each for assembling 3 components (ex. aluminium, plastic insert, liner).
• Hot melt gluing system

The machines comply with European safety laws (CE)

Continuous motion rotary assembling machine with two flywheels with 16 punches each for assembling up to a maximum of 4 plastic and aluminium components.

Loading stars synchronised with the flywheels.

The machine complies with European safety laws (CE)

Output: 30.000 pcs/hr maximum.

Continuous motion rotary assembling machine with one flywheel with 16/24 punches for assembling up to a maximum of 3 plastic and aluminium components.

Loading stars synchronised with the flywheel.

The machine complies with European safety laws (CE)

Output: 40.000 pcs/hr maximum.

Continuous motion rotary assembling machine with 1 flywheel with 12 screwing heads with magnetic control for assembling plastic components requiring to be screwed on.

Loading stars synchronised with the flywheel.

The machine complies with European safety laws (CE)

Output: 18-24.000 pcs/hr depending on the type of product to be processed.

Assembling line with screwing heads for special plastic closures up to 3pieces consisting of:

• N°01 type ARV16 continuous motion rotary assembling machine with 1 flywheel with 16 punches for assembling by pushing (snap on) 2 plastic components;
• N°01 type ARB12 continuous motion rotary screwing machine with 1 flywheel with 12 screwing heads having electronic control with brushless motors.

Loading stars synchronised with the flywheels.

Photocells that check for the correct insertion of the components into the stars.

Ejection of the non-assembled component without stopping the working cycle of the machine.

The machine complies with European safety laws (CE).

Output: 25.000 pcs/hr depending on the type of product to be processed.

Assembling line with screwing for special plastic pourers up to 6 pieces composed by:

1 continuous motion rotary screwing assembling machine with 1 flywheel with 12 screwing heads for assembling 2 components;
1 continuous motion rotary assembling machine with 3 flywheels with 12 punches each for assembling 4 components.

The machine complies with European safety laws (CE).

Output: 18 – 24.000 pcs/hr depending on the type of product to be processed.

Assembling/rolling line for special closures in aluminium + plastic consisting of up to 6 components:

• 1 continuous motion rotary assembling machine with 2 flywheels with 16 punches each for assembling 3 components;
• 1 continuous motion special rotary rolling machine with 6 heads for perforating and bending the aluminium;
• 1 continuous motion rotary assembling machine with 2 flywheels with 16 punches each for assembling 3 components.

The machines comply with European safety laws (CE)

Output: 18 – 25.000 pcs/hr depending on the type of product to be processed.

Machine for cutting the liners from coil and inserting them into aluminium or plastic caps.

Horizontal decoiler with the possibility to load one complete pallet.

Coil advancement system with linear motor.

Die tool with 2 columns with the possibility of having from 1 to 4 cutting/inserting punches according to the required output and the closure size.

Shear for cutting the scraps at each stroke. Simplified coil junction (beginning/end) and detection of the junction applied by the coil supplier. Options: Quality control system (cameras not included); ionisation system; dust aspiration system.

The machine complies with European safety laws (CE).

Output: from 8.000 to 36.000 pcs/hr depending on the number of punches and closure type.

Index motion assembling machine for special closures type Absolut Vodka and similar for assembling up to 3 plastic and aluminium components. Transfer star with intermittent movement.

The machine can be equipped with 8 to 16 stations and can perform several operations according to different requirements and the type of product to be assembled:

• injection of glue inside the aluminium cap;
• insertion of a plastic component inside the aluminium cap;
• insertion of a liner inside the plastic component;
• bending of aluminium; chamfering of aluminium onto the plastic component; control; ionisation.

The machine complies with European safety laws (CE)

Output: from 10.000 to 30.000 pcs/hr depending on the type of product to be assembled.