ALUMINIUM CAPS MACHINES - MEDIUM SPEED - SPECIAL MACHINES

Index motion side embossing & shaving machine with one embossing station having 2 heads and one shaving station having 2 heads.

Transfer star with intermittent movement.

Milling cutter in hard metal (Widia) driven by a separate motor.

Expandable pliers to hold the cap during processing.

High power dust vacuum with washable filters.

The machine complies with European safety laws (CE).

Output: 12.000 pcs/hr maximum

Special index motion machine for embossing/debossing the top side of aluminium closures.

Transfer star with intermittent movement.

Dedicated die tool with 2 punches and guiding columns to perform the top embossing/debossing operation (not oriented with the lithography).

Male/female logos in hardened steel having a system which allows a quick centring.

The machine complies with European safety laws (CE).

Output: 18-20.000 pcs/hr maximum

Vertical continuous rotary motion rolling machine with 4 heads for knurling, perforating, rolling and beading aluminium closures.

System for simultaneous centring of the knurling on all 4 heads.

Index motion special inserting machine with 2 punches for inserting liners and embossing the top of aluminium closures.

Station with 2 punches for the insertion of double faced EPE liners and/or single faced TIN foil liners (for wine).

Top embossing station with 2 guiding columns and one die set.

Transfer star with intermittent movement.

The machine complies with European safety laws (CE).

Output: 18-20.000 pcs/hr maximum

Vertical continuous rotary motion rolling machine with 4 heads for knurling, perforating, rolling and beading aluminium closures.

System for simultaneous centring of the knurling on all 4 heads.

Index motion special inserting machine for inserting double faced EPE liners and/or single faced TIN liners (for wine) and/or assembling plastic inserts with holt melt glue inside aluminium closures.

Options: Feeding unit for single faced tin foil liners; hot melt unit for the assembly with hot melt glue; quality control system prepared to accept 3 cameras (cameras not included).

The machine complies with European safety laws (CE).

Output: 20.000 pcs/hr maximum

Index motion inserting machine for inserting pre-cut and pre-stacked liners in tube inside plastic or aluminium caps.

• Transfer star with intermittent movement.
• Inserting station with 1 or 2 punches.
• Height check of the punch for checking the presence / absence of the liner or double liners.
• Tube for feeding pre-stacked liners.

Options:

• Hot-melt gluing station and infrared sensors for checking the temperature of the glue;
• Automatic loading system for 8/10 tubes with linear axis driven by brush less motors, photoelectric barrier for stopping the movement during the loading phase and management of the tubes’ loading sequence from operator’s panel.

The machine complies with European safety laws (CE).
Output: from 6.000 to 12.000 pcs/hr maximum depending on the number of punches and on the type of closure.

Inspection machine prepared to accept up to 3 cameras (a lower camera to inspect the top print, an upper one to inspect the liner and another upper one to inspect the edge of the cap).

Tubular chassis in aluminium, base plate in steel, star with 30 stations, vacuum to hold the cap in the star’s pocket, ejection of defective caps by means of an electro-valve.

Accident prevention frame with dark panels in polycarbonate to minimise the problems connected to external lighting.

Cameras not included